- Aircart Base -
Cut out the base, and score (cut one layer only) the folds. Cut holes for
the wheels. Fold the sides to make triangular beams. The flaps should meet
in the center and cover the front wheel hole. Mark the hole on the flaps
and cut out these semicircles. The glue sticks quickly, so check the positioning
and mark the final location before you glue .
Aircart base picture
Aircart base diagram
Mark the position of the flaps before glueing. The angles on the sides
must be 60 degrees or the aircart sides won't fit right.
Folding the base
Previous Page ||
Up a Level ||